You will not be able to connect to NukkitX or PocketMine-MP servers via Xbox, PS4, or Nintendo Switch. For these consoles, you must use Bedrock Dedicated Server or Geyser (recommended).

Minecraft Bedrock does not allow direct connections from XBOX, PS4 and Nintendo Switch to a server IP like the Windows 10 Edition and Pocket Edition (MCPE) do.

To be able to join a server from your console, you will have to do an additional DNS setup using a third-party program called BedrockConnect.

📺 Connecting via XBOX 📺

You can find a video tutorial here on what DNS setups you must do to set up BedrockConnect:

As the video posted above is telling, to join your server from Xbox One you will have to do the following DNS setup steps to use BedrockConnect:

1. Go to your Xbox Home screen.
2. Go to System, then on Settings.
3. Go to Network, then on Network Settings.
4. Go to Advanced Settings.
5. Select DNS Settings, then Manual.
6. Enter the BedrockConnect IP for the preferred Primary DNS (Multiple options depending on the region can be found on the BedrockConnect Github Page here) and something like Google or Cloudfare’s IP for the Secondary DNS (8.8.8.8 or 1.1.1.1).

📺 Connecting via Nintendo Switch 📺

You can find a video tutorial here on what DNS setups you must do to set up BedrockConnect:

As the video posted above is telling, to join your server from Nintendo Switch you will have to do the following DNS setup steps to use BedrockConnect:

1. Go to your Nintendo Switch Home screen.
2. Go to System Settings.
3. Select your registered network and select Change Settings.
4. Select DNS Settings, then change it to Manual.
5. Enter the BedrockConnect IP for the preferred Primary DNS (Multiple options depending on the region can be found on the BedrockConnect Github Page here) and something like Google or Cloudfare’s IP for the Secondary DNS (8.8.8.8 or 1.1.1.1).
6. Click on Save.

📺 Connecting via PS4 📺

To join your server from PS4 you will have to do the following DNS setup steps to use BedrockConnect:

1. Go to your PS4 Home screen.
2. Go to Settings.
3. Go to Network.
4. Select Set Up Internet connection.
5. If you are using wired internet, select Use LAN Cable, otherwise choose Use Wi-Fi.
6. Select the Custom network creation mode.
7. Select Automatic IP Address.
8. For DHCP Host Name, make sure you select Do Not Specify.
9. Under DNS Settings, select Manual.
10. Enter the BedrockConnect IP for the preferred Primary DNS (Multiple options depending on the region can be found on the BedrockConnect Github Page) and something like Google or Cloudfare’s IP for the Secondary DNS (8.8.8.8 or 1.1.1.1).

❕ Useful Links ❕

• PocketMine Introduction
• Nukkit Introduction
• Bedrock Dedicated Introduction

Mis à jour le : 27/02/2025